Custom user mappings in LXD containers

Introduction

As you may know, LXD uses unprivileged containers by default. The difference between an unprivileged container and a privileged one is whether the root user in the container is the “real” root user (uid 0 at the kernel level).

The way unprivileged containers are created is by taking a set of normal UIDs and GIDs from the host, usually at least 65536 of each (to be POSIX compliant) and mapping those into the container.

The most common example and what most LXD users will end up with by default is a map of 65536 UIDs and GIDs, with a host base id of 100000. This means that root in the container (uid 0) will be mapped to the host uid 100000 and uid 65535 in the container will be mapped to uid 165535 on the host. UID/GID 65536 and higher in the container aren’t mapped and will return an error if you attempt to use them.

From a security point of view, that means that anything which is not owned by the users and groups mapped into the container will be inaccessible. Any such resource will show up as being owned by uid/gid “-1” (rendered as 65534 or nobody/nogroup in userspace). It also means that should there be a way to escape the container, even root in the container would find itself with just as much privileges on the host as a nobody user.

LXD does offer a number of options related to unprivileged configuration:

• Increasing the size of the default uid/gid map
• Setting up per-container maps
• Punching holes into the map to expose host users and groups

Increasing the size of the default map

As mentioned above, in most cases, LXD will have a default map that’s made of 65536 uids/gids.

In most cases you won’t have to change that. There are however a few cases where you may have to:

• You need access to uid/gid higher than 65535. This is most common when using network authentication inside of your containers.
• You want to use per-container maps. In which case you’ll need 65536 available uid/gid per container.
• You want to punch some holes in your container’s map and need access to host uids/gids.

The default map is usually controlled by the “shadow” set of utilities and files. On systems where that’s the case, the “/etc/subuid” and “/etc/subgid” files are used to configure those maps.

On systems that do not have a recent enough version of the “shadow” package. LXD will assume that it doesn’t have to share uid/gid ranges with anything else and will therefore assume control of a billion uids and gids, starting at the host uid/gid 100000.

But the common case, is a system with a recent version of shadow.

An example of what the configuration may look like is:

stgraber@castiana:~$ cat /etc/subuid
lxd:100000:65536
root:100000:65536

stgraber@castiana:~$ cat /etc/subgid
lxd:100000:65536
root:100000:65536

The maps for “lxd” and “root” should always be kept in sync. LXD itself is restricted by the “root” allocation. The “lxd” entry is used to track what needs to be removed if LXD is uninstalled.

Now if you want to increase the size of the map available to LXD. Simply edit both of the files and bump the last value from 65536 to whatever size you need. I tend to bump it to a billion just so I don’t ever have to think about it again:

stgraber@castiana:~$ cat /etc/subuid
lxd:100000:1000000000
root:100000:1000000000

stgraber@castiana:~$ cat /etc/subgid
lxd:100000:1000000000
root:100000:100000000

After altering those files, you need to restart LXD to have it detect the new map:

root@vorash:~# systemctl restart lxd
root@vorash:~# cat /var/log/lxd/lxd.log
lvl=info msg="LXD 2.14 is starting in normal mode" path=/var/lib/lxd t=2017-06-14T21:21:13+0000
lvl=warn msg="CGroup memory swap accounting is disabled, swap limits will be ignored." t=2017-06-14T21:21:13+0000
lvl=info msg="Kernel uid/gid map:" t=2017-06-14T21:21:13+0000
lvl=info msg=" - u 0 0 4294967295" t=2017-06-14T21:21:13+0000
lvl=info msg=" - g 0 0 4294967295" t=2017-06-14T21:21:13+0000
lvl=info msg="Configured LXD uid/gid map:" t=2017-06-14T21:21:13+0000
lvl=info msg=" - u 0 1000000 1000000000" t=2017-06-14T21:21:13+0000
lvl=info msg=" - g 0 1000000 1000000000" t=2017-06-14T21:21:13+0000
lvl=info msg="Connecting to a remote simplestreams server" t=2017-06-14T21:21:13+0000
lvl=info msg="Expiring log files" t=2017-06-14T21:21:13+0000
lvl=info msg="Done expiring log files" t=2017-06-14T21:21:13+0000
lvl=info msg="Starting /dev/lxd handler" t=2017-06-14T21:21:13+0000
lvl=info msg="LXD is socket activated" t=2017-06-14T21:21:13+0000
lvl=info msg="REST API daemon:" t=2017-06-14T21:21:13+0000
lvl=info msg=" - binding Unix socket" socket=/var/lib/lxd/unix.socket t=2017-06-14T21:21:13+0000
lvl=info msg=" - binding TCP socket" socket=[::]:8443 t=2017-06-14T21:21:13+0000
lvl=info msg="Pruning expired images" t=2017-06-14T21:21:13+0000
lvl=info msg="Updating images" t=2017-06-14T21:21:13+0000
lvl=info msg="Done pruning expired images" t=2017-06-14T21:21:13+0000
lvl=info msg="Done updating images" t=2017-06-14T21:21:13+0000
root@vorash:~#

As you can see, the configured map is logged at LXD startup and can be used to confirm that the reconfiguration worked as expected.

You’ll then need to restart your containers to have them start using your newly expanded map.

Per container maps

Provided that you have a sufficient amount of uid/gid allocated to LXD, you can configure your containers to use their own, non-overlapping allocation of uids and gids.

This can be useful for two reasons:

1. You are running software which alters kernel resource ulimits. Those user-specific limits are tied to a kernel uid and will cross container boundaries leading to hard to debug issues where one container can perform an action but all others are then unable to do the same.
2. You want to know that should there be a way for someone in one of your containers to somehow get access to the host that they still won’t be able to access or interact with any of the other containers.

• It’s somewhat wasteful with using 65536 uids and gids per container. That being said, you’d still be able to run over 60000 isolated containers before running out of system uids and gids.
• It’s effectively impossible to share storage between two isolated containers as everything written by one will be seen as -1 by the other. There is ongoing work around virtual filesystems in the kernel that will eventually let us get rid of that limitation.

To have a container use its own distinct map, simply run:

stgraber@castiana:~$ lxc config set test security.idmap.isolated true
stgraber@castiana:~$ lxc restart test
stgraber@castiana:~$ lxc config get test volatile.last_state.idmap
[{"Isuid":true,"Isgid":false,"Hostid":165536,"Nsid":0,"Maprange":65536},{"Isuid":false,"Isgid":true,"Hostid":165536,"Nsid":0,"Maprange":65536}]

The restart step is needed to have LXD remap the entire filesystem of the container to its new map. Note that this step will take a varying amount of time depending on the number of files in the container and the speed of your storage.

As can be seen above, after restart, the container is shown to have its own map of 65536 uids/gids.

If you want LXD to allocate more than the default 65536 uids/gids to an isolated container, you can bump the size of the allocation with:

stgraber@castiana:~$ lxc config set test security.idmap.size 200000
stgraber@castiana:~$ lxc restart test
stgraber@castiana:~$ lxc config get test volatile.last_state.idmap
[{"Isuid":true,"Isgid":false,"Hostid":165536,"Nsid":0,"Maprange":200000},{"Isuid":false,"Isgid":true,"Hostid":165536,"Nsid":0,"Maprange":200000}]

stgraber@castiana:~$ lxc config set test security.idmap.size 2000000000
error: Not enough uid/gid available for the container.

Direct user/group mapping

The fact that all uids/gids in an unprivileged container are mapped to a normally unused range on the host means that sharing of data between host and container is effectively impossible.

Now, what if you want to share your user’s home directory with a container?

The obvious answer to that is to define a new “disk” entry in LXD which passes your home directory to the container:

stgraber@castiana:~$ lxc config device add test home disk source=/home/stgraber path=/home/ubuntu
Device home added to test

stgraber@castiana:~$ lxc exec test -- bash
root@test:~# ls -lh /home/
total 529K
drwx--x--x 45 nobody nogroup 84 Jun 14 20:06 ubuntu

No. The mount is clearly there, but it’s completely inaccessible to the container. To fix that, we need to take a few extra steps:

• Allow LXD’s use of our user uid and gid
• Restart LXD to have it load the new map
• Set a custom map for our container
• Restart the container to have the new map apply

stgraber@castiana:~$ printf "lxd:$(id -u):1\nroot:$(id -u):1\n" | sudo tee -a /etc/subuid
lxd:201105:1
root:201105:1

stgraber@castiana:~$ printf "lxd:$(id -g):1\nroot:$(id -g):1\n" | sudo tee -a /etc/subgid
lxd:200512:1
root:200512:1

stgraber@castiana:~$ sudo systemctl restart lxd

stgraber@castiana:~$ printf "uid $(id -u) 1000\ngid $(id -g) 1000" | lxc config set test raw.idmap -

stgraber@castiana:~$ lxc restart test

At which point, things should be working in the container:

stgraber@castiana:~$ lxc exec test -- su ubuntu -l
ubuntu@test:~$ ls -lh
total 119K
drwxr-xr-x 5  ubuntu ubuntu 8 Feb 18 2016 data
drwxr-x--- 4  ubuntu ubuntu 6 Jun 13 17:05 Desktop
drwxr-xr-x 3  ubuntu ubuntu 28 Jun 13 20:09 Downloads
drwx------ 84 ubuntu ubuntu 84 Sep 14 2016 Maildir
drwxr-xr-x 4  ubuntu ubuntu 4 May 20 15:38 snap
ubuntu@test:~$ 

Conclusion

User namespaces, the kernel feature that makes those uid/gid mappings possible is a very powerful tool which finally made containers on Linux safe by design. It is however not the easiest thing to wrap your head around and all of that uid/gid map math can quickly become a major issue.

In LXD we’ve tried to expose just enough of those underlying features to be useful to our users while doing the actual mapping math internally. This makes things like the direct user/group mapping above significantly easier than it otherwise would be.

Going forward, we’re very interested in some of the work around uid/gid remapping at the filesystem level, this would let us decouple the on-disk user/group map from that used for processes, making it possible to share data between differently mapped containers and alter the various maps without needing to also remap the entire filesystem.

Extra information

The main LXD website is at: https://linuxcontainers.org/lxd

Development happens on Github at: https://github.com/lxc/lxd

Discussion forum: https://discuss.linuxcontainers.org

Mailing-list support happens on: https://lists.linuxcontainers.org

IRC support happens in: #lxcontainers on irc.freenode.net

Try LXD online: https://linuxcontainers.org/lxd/try-it